Flashing Roof Locating – 3 Tips for Asphalt Shingle Roofs

As unlikely as it sounds, you do not need to be an experienced for Shingle roof repair. With a set of reliable rules and tips, along with a proper toolbox, you should be able to redo these repairs. If it is a big matter, then you can order the roofing repair professionals from New Roof Page.

Tip 1 – Locate the Leak on Your Roof

Locating a leak on your roof is possibly the most important step in repairing the leak. Start with any clues you have, such as water dripping from the ceiling or discoloration that is discolored, wet or protruding. Once you find these clues, look in your attic above the damp spot on your ceiling.

Tip 2 – Locate the Flashing Leak

Once you have located the flashing leak from its position in the attic or crawl space, go up to the roof and locate the leaking flash. If it is raining or snowing, mark the leak by flashing so you can find it when the roof is dry and you are ready to repair it.

Tip 3 – Locating the Head Wall Flashing Leaks

The installed flashing must fit under the wall material and the roof in such a way that water cannot enter the space between the wall and the roof. Caulk, cement or roofing should not be applied to these areas. If you discover any of these types of waterproofing that are already on your roof, it is likely that someone’s previous efforts have corrected a leak.

Tip 3 – Locating Chimneys Flashing Leaks

Chimney leaks are among the most common of intermittent leaks. This is because four different types of flashes are commonly used, all of which must be leak-proof to prevent the flash from leaking. To find leaks in these flashes, determine if there is any crack in the chimney through which water can leak under the flash.